The most important thing about safety shoes is the woman who wears them. Starting from this thought, Honeywell has designed Cocoon Evo, a line of women’s work footwear that respects ladies’ needs. Take your walking experience further and benefit from an extended lifespan. Be fully aware of how long Cocoon Evo shoes offer you the safety you deserve with their wear off indicators, a unique feature in their class. Providing improved comfort, strong safety performances, electrostatic discharge (ESD) protection, lightness, breathability as well as a modern design, Cocoon Evo safety shoes totally adapt to a lady’s requirements. There are many pairs of safety shoes in the market. Meet the right one. Honeywell has put safety and convenience at ladies’ feet.

SHELL MID

S3 HI CI SRC ESD

• 100% non-metallic toecap
• Mid-cut style
• Nubuck leather upper
• 3D mesh with foam lining
• Textile anti-perforation interlayer
• EVA/TPU sole
• HI and CI markings: resistance to inimical environments – heat insulation and cold insulation of the sole complex
• ESD marking: electrical resistance
• ESD (EN 61340:5-1:2016) S3 HI CI SRC ESD

BEYOND COMPLIANCE, ABOVE YOUR EXPECTATIONS

Tests have shown that Shell Mid performs beyond certification levels, providing ladies with safety and comfort that exceed their requirements*:

MORE PROTECTION

• 34% more impact resistance than the standard requirements. Shell Mid has an impact resistance amounting to 18.75, compared to the required level of ≥ 14 mm.
• 31% more slip resistance (flat position) than SRA**requirements. Shell Mid recorded a value of 0.42, up against the required level of ≥ 0.32.
• 68% more slip resistance (heel area) than SRA requirements. Shell Mid provides a figure amounting to 0.47, up against the required level of ≥ 0.28.

MORE DURABLE LINING

• 467% more tear strength against standard requirements. Shell Mid recorded a value of 87 N, exceeding the standard requirement of ≥ 15 N.
• 1,880% more water permeability than standard requirements. Shell Mid provides a water permeability index of 39.6 mg/ (cm2.h), exceeding the required level of ≥ 2 mg/ (cm2.h).

MORE BREATHABLE UPPER

• 663% more water permeability than the standard requirements. Shell Mid has an average value of 6.1 mg/(cm2.h), up against the level of ≥ 0.8 mg/cm2.h), required by the standard.
• 296% more water vapor permeability and absorption. Shell Mid recorded a water coefficient of 59.35 mg/cm2, up against the standard requirement of ≥ 15 mg/ cm2.

THE FEATURES THAT MAKE THE DIFFERENCE

• On ceramic floor:
  • Heel: 0.47 (minimum standard 0.28)
  • Flat: 0.42 (minimum standard 0.32)
• Energy absorption capacity: >20 J
• Abrasion resistance: loss in volume <150 mm3 (under a 10 Newtons (1 kg) load)
  • Elongation at break: 650%
  • Resistance to repeated flexion optimized: >30,000
• Flexometer tested-standard: >30,000
• Enhanced hydrocarbon resistance
• Resistance to acids and bases: limited to low concentration

TECHNICAL SPECIFICATIONS AND STANDARDS:

• European Regulation: (EU) 2016/425*
• Standard: ESD (EN 61340:5- 1:2016)**
• Quality assurance: ISO 9001 Version 2015***
• Marking: S3 HI CI SRC ESD
• Average weight for 1 shoe 42 size: 596 g