/content/sps/au/en/search-results.html

    Fixed Gas Detectors

    Sensepoint Flammable

    Sensepoint Flammable (0-100%LEL +80°C, 0-10%LEL +65°C)

    Overview
    The Sensepoint range of flammable, toxic and oxygen gas detectors offerusers a high quality, low cost solution to their industrial gas monitoringneeds. Installation in potentially explosive atmospheres is made by theuse of a suitable Ex d or EX e approved junction box. The industry standardoutputs from Sensepoint are connected to either a choice of HoneywellAnalytics’ controllers or 3rd party DCS/PLC systems. both flammable andtoxic versions are certified to ATEX and IECEx. The flammable detector is available in either %LEL or PPM detection rangeversions and provides an industry standard mV bridge output. Typical lifeexpectancy is greater than 5 years, after which the detector is simplyreplaced with a new one. The toxic detectors are supplied pre calibratedfor easy installation and provide an industry standard 2 wire 4-20mA loopoutput. User connections are Ex d, while front end Intrinsic Safety (IS)design allows for easy exchange of the replaceable sensor while poweredIS design also removes the need for a sinter enabling very fast speed ofresponse and detection of ‘sticky’ gases such as Chlorine and Ammonia.The Sensepoint high temperature sensor has been specifically designedfor the detection of combustible gases in high temperature hazardous arealocations. Typical applications include turbine enclosures and drying ovensused in solvent based printing and coating machines. These applicationsrequire a sensor that provides reliable and stable detection allowing lowlevel alarm settings across a wide temperature range. Utilizing a speciallymatched pair of Sieger poison resistant combustible gas detectionelements, the Sensepoint High Temperature Sensor has a very stablebaseline allowing alarm trip points to be set as low as 5% LEL across atemperature range of -55°C to +150°C (-67°F to +302°F). The gas measuringrange can be configured from 0-20% LEL up to 0-100% LEL depending on thetype of controller used.
    Specifications

    Overview

    • Brand
      • Honeywell

    Dimensions & Weight

    • Weight range
      • 190 g

    Technical Specifications

    • Humidity Range
      • Continuous: 20 to 90% RH (Non-Condensing)
      • Intermittent: 10 to 99% RH (Non-Condensing)
    • Analog Output Connection
      • 3-Wire
    • Maximum Pressure
      • 110 kPa
    • Warm Up Time
      • < 10 min
    • Stability (zero)
      • With Humidity: < ±1% fsd
      • With Temperature: < ±1% fsd
      • With Time: < ±3% fsd/yr
    • Stability (span)
      • With Humidity: < ±2% fsd
      • With Temperature: < ±3% fsd
      • With Time: < ±3% fsd/yr
    • Signal Output
      • mV Bridge
    • Conduit Entries
      • 3/4 in NPT
      • M20
      • M25
      • M26

    Operating Characteristics

    • Minimum Temperature
      • -40˚C
    • Storage Temperature
      • 0 to 25˚C

    Features

    • Alarm Included
      • No
    • Features & Benefits
      • 2 to 5 Years Operational Life
      • Collecting Cone
      • Complies with the Latest Standards
      • Duct Mounting Kit
      • Factory Set Operation
      • Fast and Reliable
      • Flammable, Toxic and Oxygen Versions Available
      • Flow Adaptor
      • Hazardous Area Approval and Performance
      • High Performance, Low Cost
      • IP65/67
      • Minimal Training Required
      • Poison Resistant Catalytic Bead
      • Simple to Replace
      • Suitable for New and Retro Fit Applications
      • SureCell Electrochemical Sensors
      • Weatherproof Cap
    • Filter Included
      • Yes
    • Storage Life
      • 5 Years

    Material Specifications

    • Material
      • Polyphenylene Sulphide (PPS)

    Standards & Certifications

    • Ingress Protection
      • IP65/67

    Electrical Specifications

    • Power Requirement
      • 0.7 W @200 mA

    Overview

    • Brand
      • Honeywell

    Dimensions & Weight

    • Weight range
      • 190 g

    Technical Specifications

    • Humidity Range
      • Continuous: 20 to 90% RH (Non-Condensing)
      • Intermittent: 10 to 99% RH (Non-Condensing)
    • Analog Output Connection
      • 3-Wire
    • Maximum Pressure
      • 110 kPa
    • Warm Up Time
      • < 10 min
    • Stability (zero)
      • With Humidity: < ±1% fsd
      • With Temperature: < ±1% fsd
      • With Time: < ±3% fsd/yr
    • Stability (span)
      • With Humidity: < ±2% fsd
      • With Temperature: < ±3% fsd
      • With Time: < ±3% fsd/yr
    • Signal Output
      • mV Bridge
    • Conduit Entries
      • 3/4 in NPT
      • M20
      • M25
      • M26

    Operating Characteristics

    • Minimum Temperature
      • -40˚C
    • Storage Temperature
      • 0 to 25˚C

    Features

    • Alarm Included
      • No
    • Features & Benefits
      • 2 to 5 Years Operational Life
      • Collecting Cone
      • Complies with the Latest Standards
      • Duct Mounting Kit
      • Factory Set Operation
      • Fast and Reliable
      • Flammable, Toxic and Oxygen Versions Available
      • Flow Adaptor
      • Hazardous Area Approval and Performance
      • High Performance, Low Cost
      • IP65/67
      • Minimal Training Required
      • Poison Resistant Catalytic Bead
      • Simple to Replace
      • Suitable for New and Retro Fit Applications
      • SureCell Electrochemical Sensors
      • Weatherproof Cap
    • Filter Included
      • Yes
    • Storage Life
      • 5 Years

    Material Specifications

    • Material
      • Polyphenylene Sulphide (PPS)

    Standards & Certifications

    • Ingress Protection
      • IP65/67

    Electrical Specifications

    • Power Requirement
      • 0.7 W @200 mA
    • Brand : Honeywell
    • Weight range : 190 g
    • Humidity Range : Continuous: 20 to 90% RH (Non-Condensing)|Intermittent: 10 to 99% RH (Non-Condensing)
    • Minimum Temperature : -40˚C
    • Alarm Included : No
    • Analog Output Connection : 3-Wire
    • Features & Benefits : 2 to 5 Years Operational Life|Collecting Cone|Complies with the Latest Standards|Duct Mounting Kit|Factory Set Operation|Fast and Reliable|Flammable, Toxic and Oxygen Versions Available|Flow Adaptor|Hazardous Area Approval and Performance|High Performance, Low Cost|IP65/67|Minimal Training Required|Poison Resistant Catalytic Bead|Simple to Replace|Suitable for New and Retro Fit Applications|SureCell Electrochemical Sensors|Weatherproof Cap
    • Filter Included : Yes
    • Material : Polyphenylene Sulphide (PPS)
    • Maximum Pressure : 110 kPa
    • Ingress Protection : IP65/67
    • Warm Up Time : < 10 min
    • Storage Temperature : 0 to 25˚C
    • Storage Life : 5 Years
    • Stability (zero) : With Humidity: < ±1% fsd|With Temperature: < ±1% fsd|With Time: < ±3% fsd/yr
    • Stability (span) : With Humidity: < ±2% fsd|With Temperature: < ±3% fsd|With Time: < ±3% fsd/yr
    • Signal Output : mV Bridge
    • Power Requirement : 0.7 W @200 mA
    • Conduit Entries : 3/4 in NPT|M20|M25|M26

    Filters

    Product Number
    Part Number
    Description
    Leaf Category
    Thumbnail
    Add to list
    2106B1200
    SENSEPOINT 0-100LEL COMB M20 (ATEX)
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1200
    SENSEPOINT 0-100LEL COMB M20 (ATEX)
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1201
    SENSEPOINT 0-100%LEL COMBUSTIBLE M25
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1201
    SENSEPOINT 0-100%LEL COMBUSTIBLE M25
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1202
    Sensepoint 0-100% LEL Flam. Sensor M26
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1202
    Sensepoint 0-100% LEL Flam. Sensor M26
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1203
    Sensepoint Flammable M26 VQ1AB pellistor
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1203
    Sensepoint Flammable M26 VQ1AB pellistor
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1204
    SENSEPOINT 0-100LEL COMB 34NPT ATEX
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1204
    SENSEPOINT 0-100LEL COMB 34NPT ATEX
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1205
    SENSEPOINT PPM (0-10% LEL) COMB SEN
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1205
    SENSEPOINT PPM (0-10% LEL) COMB SEN
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1206
    Sensepoint ppm Flam. Sensor M25*
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1206
    Sensepoint ppm Flam. Sensor M25*
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1209
    Sensepoint ppm Flam. Sensor 34NPT*
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B1209
    Sensepoint ppm Flam. Sensor 34NPT*
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B2310
    SENSEPOINT HGH TMP CMB SNSR M20 ATEX
    https://s7d1.scene7.com/is/image/Honeywell65/hbt-fire-2106b2310-sensepoint-high-temperature-flammable-sensor-primaryimage
    2106B2310
    SENSEPOINT HGH TMP CMB SNSR M20 ATEX
    https://s7d1.scene7.com/is/image/Honeywell65/hbt-fire-2106b2310-sensepoint-high-temperature-flammable-sensor-primaryimage
    2106B2311
    SENSEPOINT HGH TMP CMB SNSR M25 ATEX
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
    2106B2311
    SENSEPOINT HGH TMP CMB SNSR M25 ATEX
    https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero