Fixed Gas Detectors
Sensepoint Toxic
Sensepoint Toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output
Please sign in to access more documents
Once signed in, you may be able to access additional documents for your account.
Overview
The Sensepoint range of flammable, toxic and oxygen gas detectors offerusers a high quality, low cost solution to their industrial gas monitoringneeds. Installation in potentially explosive atmospheres is made by theuse of a suitable Ex d or EX e approved junction box. The industry standardoutputs from Sensepoint are connected to either a choice of HoneywellAnalytics’ controllers or 3rd party DCS/PLC systems. both flammable andtoxic versions are certified to ATEX and IECEx. The flammable detector is available in either %LEL or PPM detection rangeversions and provides an industry standard mV bridge output. Typical lifeexpectancy is greater than 5 years, after which the detector is simplyreplaced with a new one. The toxic detectors are supplied pre calibratedfor easy installation and provide an industry standard 2 wire 4-20mA loopoutput. User connections are Ex d, while front end Intrinsic Safety (IS)design allows for easy exchange of the replaceable sensor while poweredIS design also removes the need for a sinter enabling very fast speed ofresponse and detection of ‘sticky’ gases such as Chlorine and Ammonia.The Sensepoint high temperature sensor has been specifically designedfor the detection of combustible gases in high temperature hazardous arealocations. Typical applications include turbine enclosures and drying ovensused in solvent based printing and coating machines. These applicationsrequire a sensor that provides reliable and stable detection allowing lowlevel alarm settings across a wide temperature range. Utilizing a speciallymatched pair of Sieger poison resistant combustible gas detectionelements, the Sensepoint High Temperature Sensor has a very stablebaseline allowing alarm trip points to be set as low as 5% LEL across atemperature range of -55°C to +150°C (-67°F to +302°F). The gas measuringrange can be configured from 0-20% LEL up to 0-100% LEL depending on thetype of controller used.
Specifications
Overview
- Brand
- Honeywell
Dimensions & Weight
- Weight range
- 185 to 205 g
Technical Specifications
- Humidity Range
- Continuous: 20 to 90% RH (Non-Condensing)
- Intermittent: 10 to 99% RH (Non-Condensing)
- Analog Output Connection
- 3-Wire
- Maximum Pressure
- 110 kPa
- Signal Output
- Loop Powered 4 to 20 mA
- Conduit Entries
- 3/4 in NPT
- M20
- M25
Operating Characteristics
- Minimum Temperature
- -20˚C
- Storage Temperature
- 0 to 25˚C
Features
- Alarm Included
- No
- Features & Benefits
- 2 to 5 Years Operational Life
- Collecting Cone
- Complies with the Latest Standards
- Duct Mounting Kit
- Factory Set Operation
- Fast and Reliable
- Flammable, Toxic and Oxygen Versions Available
- Flow Adaptor
- Hazardous Area Approval and Performance
- High Performance, Low Cost
- IP65/67
- Minimal Training Required
- Poison Resistant Catalytic Bead
- Simple to Replace
- Suitable for New and Retro Fit Applications
- SureCell Electrochemical Sensors
- Weatherproof Cap
- Filter Included
- Yes
- Storage Life
- 6 Months
Material Specifications
- Material
- Polyphenylene Sulphide (PPS)
Standards & Certifications
- Ingress Protection
- IP65/67
Electrical Specifications
- Power Requirement
- 0.9 W @18 to 30 VDC
Overview
- Brand
- Honeywell
Dimensions & Weight
- Weight range
- 185 to 205 g
Technical Specifications
- Humidity Range
- Continuous: 20 to 90% RH (Non-Condensing)
- Intermittent: 10 to 99% RH (Non-Condensing)
- Analog Output Connection
- 3-Wire
- Maximum Pressure
- 110 kPa
- Signal Output
- Loop Powered 4 to 20 mA
- Conduit Entries
- 3/4 in NPT
- M20
- M25
Operating Characteristics
- Minimum Temperature
- -20˚C
- Storage Temperature
- 0 to 25˚C
Features
- Alarm Included
- No
- Features & Benefits
- 2 to 5 Years Operational Life
- Collecting Cone
- Complies with the Latest Standards
- Duct Mounting Kit
- Factory Set Operation
- Fast and Reliable
- Flammable, Toxic and Oxygen Versions Available
- Flow Adaptor
- Hazardous Area Approval and Performance
- High Performance, Low Cost
- IP65/67
- Minimal Training Required
- Poison Resistant Catalytic Bead
- Simple to Replace
- Suitable for New and Retro Fit Applications
- SureCell Electrochemical Sensors
- Weatherproof Cap
- Filter Included
- Yes
- Storage Life
- 6 Months
Material Specifications
- Material
- Polyphenylene Sulphide (PPS)
Standards & Certifications
- Ingress Protection
- IP65/67
Electrical Specifications
- Power Requirement
- 0.9 W @18 to 30 VDC
- Brand : Honeywell
- Weight range : 185 to 205 g
- Humidity Range : Continuous: 20 to 90% RH (Non-Condensing)|Intermittent: 10 to 99% RH (Non-Condensing)
- Minimum Temperature : -20˚C
- Alarm Included : No
- Analog Output Connection : 3-Wire
- Features & Benefits : 2 to 5 Years Operational Life|Collecting Cone|Complies with the Latest Standards|Duct Mounting Kit|Factory Set Operation|Fast and Reliable|Flammable, Toxic and Oxygen Versions Available|Flow Adaptor|Hazardous Area Approval and Performance|High Performance, Low Cost|IP65/67|Minimal Training Required|Poison Resistant Catalytic Bead|Simple to Replace|Suitable for New and Retro Fit Applications|SureCell Electrochemical Sensors|Weatherproof Cap
- Filter Included : Yes
- Material : Polyphenylene Sulphide (PPS)
- Maximum Pressure : 110 kPa
- Ingress Protection : IP65/67
- Storage Temperature : 0 to 25˚C
- Storage Life : 6 Months
- Signal Output : Loop Powered 4 to 20 mA
- Power Requirement : 0.9 W @18 to 30 VDC
- Conduit Entries : 3/4 in NPT|M20|M25
Product Number
Please sign in to view part numbers available for purchase based on your account Sign In
Part Number
Description
Leaf Category
Thumbnail
Add to list
2106B1400
Sensepoint H2S 0-20 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1400
Sensepoint H2S 0-20 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1401
Sensepoint H2S 0-50 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1401
Sensepoint H2S 0-50 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1402
SENSEPOINT H2S 0-100PPM M20 (ATEX)
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1402
SENSEPOINT H2S 0-100PPM M20 (ATEX)
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1405
Sensepoint CO 0-100 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1405
Sensepoint CO 0-100 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1406
SENSEPOINT CO 0-200 PPM TOXIC SENSOR
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1406
SENSEPOINT CO 0-200 PPM TOXIC SENSOR
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1407
Sensepoint CO 0-500 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1407
Sensepoint CO 0-500 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1410
SENSEPOINT CL2 0-5 PPM TOXIC SENSOR
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1410
SENSEPOINT CL2 0-5 PPM TOXIC SENSOR
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1411
Sensepoint Cl2 0-15 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1411
Sensepoint Cl2 0-15 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1413
Sensepoint NH3 0-50 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1413
Sensepoint NH3 0-50 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1414
Sensepoint NH3 0-1000 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
2106B1414
Sensepoint NH3 0-1000 ppm Toxic Sensor M20
https://honeywell.scene7.com/is/image/Honeywell65/hon-ia-pmc-sensepoint-image-hero
