fixed gas detectors
Sensepoint Gas Sensor with Junction Box
Hazardous Area Gas Sensor with Junction Box
Please sign in to access more documents
Once signed in, you may be able to access additional documents for your account.
Overview
This Sensepoint range of flammable, toxic and oxygen gas detectors offer users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres (ATEX approval only).Note: the flammable sensor is certified to +50°C only (see Sensepoint for higher temp ranges). Supplied with a pre-wired junction box, the detector can be installed using conduit or armoured cable and glands depending on individual site standards.The junction box includes a hinged lid to ensure both hands are free to complete electrical connections. Threaded M20 as well as ¾” and ½” NPT clearance entries are included as standard, each one fitted with an appropriate seal, so enabling the user to select the most convenient entry size to use.Each ATEX approved Sensepoint is supplied complete with pre-wired universal junction box (1 x threaded M20, 1x clearance 3/4'NPT, 1 x clearance 1/2'NPT, 3 x approved stopping plugs, earth continuity plate), instruction manual and factory set gas sensor.
Specifications
Overview
- Brand
- Honeywell
Dimensions & Weight
- Weight range
- 190 g
Technical Specifications
- Humidity Range
- Continuous: 20 to 90% RH
- Intermittent: 10 to 99% RH (Non-Condensing)
- Maximum Pressure
- 110 kPa
- Conduit Entries
- M20, 3/4 in NPT
- Signal Output
- mV Bridge
- Warm Up Time
- 20 min
Operating Characteristics
- Minimum Temperature
- -30°C
Battery & Charging
- Batteries Required
- No
- Batteries Included
- No
Features
- Filter Included
- Yes
Standards & Certifications
- Ingress Protection
- IP65
- IP67
Electrical Specifications
- Power Consumption
- 700 mW
- Operating Voltage
- 2.9 to 3.5 V
Others
- Industry
- Commercial Buildings
- Energy
- Manufacturing
Overview
- Brand
- Honeywell
Dimensions & Weight
- Weight range
- 190 g
Technical Specifications
- Humidity Range
- Continuous: 20 to 90% RH
- Intermittent: 10 to 99% RH (Non-Condensing)
- Maximum Pressure
- 110 kPa
- Conduit Entries
- M20, 3/4 in NPT
- Signal Output
- mV Bridge
- Warm Up Time
- 20 min
Operating Characteristics
- Minimum Temperature
- -30°C
Battery & Charging
- Batteries Required
- No
- Batteries Included
- No
Features
- Filter Included
- Yes
Standards & Certifications
- Ingress Protection
- IP65
- IP67
Electrical Specifications
- Power Consumption
- 700 mW
- Operating Voltage
- 2.9 to 3.5 V
Others
- Industry
- Commercial Buildings
- Energy
- Manufacturing
- Brand : Honeywell
- Weight range : 190 g
- Humidity Range : Continuous: 20 to 90% RH|Intermittent: 10 to 99% RH (Non-Condensing)
- Minimum Temperature : -30°C
- Batteries Required : No
- Batteries Included : No
- Filter Included : Yes
- Ingress Protection : IP65|IP67
- Maximum Pressure : 110 kPa
- Power Consumption : 700 mW
- Operating Voltage : 2.9 to 3.5 V
- Conduit Entries : M20, 3/4 in NPT
- Signal Output : mV Bridge
- Warm Up Time : 20 min
- Industry : Commercial Buildings|Energy|Manufacturing
Please sign in to access more documents.
Once signed in, you may be able to access additional documents for your account.
Name
Description
File Size
Date
Size
Name
Description
File Size
Date
Size
Please sign in to view part numbers available for purchase based on your account Sign In
Part Number
Compare
Description
Leaf Category
Thumbnail
Add to list
