Miller Multi Rail horizontal system

Key features

Söll MultiRail Stainless Steel system offers an adapted solution for any industrial building or wind energy turbine.

Various fixation possibilities are available for different structures. Just a few bolts and tools are required for a quick and easy assembly of the rail system.

Söll MultiRail provides fall protection for up to 6 workers across a maximum span of 6m, depending on the rail configuration. If a fall occurs, this effective system ensures that structural damage is prevented through energy absorption by the several intermediate brackets and the end-fixing devices.

Four different runners ensure smooth movement of the worker along the rail: closed runner for frequent use of the same rail, openable runner for flexible use on several rail systems, wheeled runner for overhead applications and a lockable runner for working situations where the shuttle should not move.

Robust rail system that is quick and easy to install

In case of a fall, the energy is reduced by the bending of the rail, thereby the structure remains protected. The low friction mounting brackets transmit in the event of a fall the absolute minimum impact to the structure. In conformity with the EN795:2012 standard, the rail can absorb forces up to 70 kg without permanent deformation.

The rail is not fixed into mounting brackets and therefore compensates for thermal expansion. Easy connection of curves and T-junctions allow the system to be easily customized to any structure.

A worker connected to the Söll MultiRail system can pass safely along vertical sections up to 1 m high. 

The Söll MultiRail horizontal anchor device is often used in the following sectors:
• Storefronts• Flat or steep roofs• Working platforms on masts and buildings• Hangars, shipyards, cranes• Industrial plants• Wind nacelles• Water treatment

Söll MultiRail can also be used as an overhead solution in combination with a self retractable lifeline attached to a wheeled shuttlefor example in following applications:• Truck cleaning• Maintenance• Loading bay

Suitable for working in suspension
The system is suitable for working in suspension under the following conditions:• Up to 2 users in the system

• The structure is rigid enough that no deformation occurs during usage

• Connection to two wheeled overhead mobile anchor points (shuttles), one for suspension and one for fall protection

• Construction
• Manufacturing
• Oil and Gas
• Transportation
• Utilities
• Nuclear
• Wind Energy

• Fall from height

• Conforms to EN 795:2012 type D standard