Honeywell BW™ Icon+

• Brand : BW|Honeywell BW

• Weight : 185 gram

• Sub-Category : Multi-Gas|Multi-Gas Detector

• Instrument Size : 108.2mm x 61.5mm x 43.2mm (4.29in x 2.44in x 1.7in) with Alligator Clip

• Weight range : 169 g with Klick Fast Stud gram|185 g with Alligator Clip gram

• Humidity Range : 0%-95% RH percent|5 to 95% percent

• Sensor Range : O2 (0-30%vol), LEL (0-100% LEL), CO (0-2000ppm), H2S (0-200ppm), SO2 (0-150ppm)

• Minimum Temperature : -40|-40 degree Celsius

• Maximum Temperature : 60|60 degree Celsius

• Alarm Settings : Low, High, TWA, STEL, Negative Drift, OL (Over Limit), Multi-Alarm

• Alarm Included : Yes

• Alarm Type : Audible (95 dB)|Vibrating|Visual

• Batteries Required : Yes

• Batteries Included : Yes

• Battery Run Time : 2 Months (with NDIR CH4 Sensor) hours|Up to 2 Months hours

• Charging Time : 4.5 hours

• Certifications - Hazloc : ATEX, IECEX, CSA

• Standards : ATEX|FCCID and IC|IEC Ex

• Datalogging Interval : 15 sec

• Datalogging Capable : Yes

• Datalogging : 45 days of data at 15 sec interval, 8hrs/day

• Display Included : Yes

• Display Readout : Gas Levels and Device Status

• Display Type : Icon

• Features & Benefits : Accurate: Low Power Infrared LEL Sensor is Immune to Silicone Poisoning, which Means Accurate Monitoring of Combustibles|Compatible: IntelliDoX Instrument Management System and Honeywell Safety Suite and Also with TouchConnect™ Using Bluetooth for Wireless Configuration|Easy to Manage: The IntelliFlash™ Green Light Indicates when the Detector is in Compliance and the Amber Light Indicates the Need for Maintenance|Easy to Use: Small, Lightweight and Wearable. One-Button Operation|Reliable: Two Months of Battery Runtime on a 4.5-Hour Charge and Up To Four Months If You Turn Off the Detector at the End of Each Shift. No Daily Charging, No Unexpected Downtime|Responsive: Series Sensors Respond to Dangerous Gas Levels in Seconds, Even in Harsh Temperatures

• User Options : Always ON|Assign Worker and Location Assignments|Change High, Low, TWA and STEL Alarm Set Points|Latching Alarms|Set Calibration and/or Bump Test Reminders|User Options Only Available via Device Configurator and Safety Suite Device Configurator

• Sensor Type : Infrared (IR)

• Operating Life : 3 years

• Warranty : 3 Years|3 Years for Sensors and Detector

• Wireless Technology : BLE|Bluetooth (BLE)

• Wireless Enabled : Yes

• Combustible Concentration : NDIR-CH4: 0-100% LEL

• External Calibration : IntelliDox Instrument Management System

• Ingress Protection : IP66/68|IP66/IP68

• Combustible : Yes

• Gas Type : H2S, CO, O2, LEL, SO2

• Decibels : 95 decibel

• Size : 4.29 in x 2.44 in x 1.49 in (with Klick Fast Stud)|4.29 in x 2.44 in x 1.7 in (with Alligator Clip)

• Status Indicator : Icons and Alarm

• Connected Worker : Bluetooth (BLE) - Ability to Connect to Honeywell’S Safety Communicator App|Device Configurator App and Safety Suite Device Configurator Software

• Event Logging : 45 Days of Data at 15 sec Interval, 8 Hours/Day

• Power Source : Battery

• Series Name : Honeywell BW Icon+

• Keypad Type : One Button Operation

• Tests : Activated Detector Automatically Performs Analog Sensor Diagnostic Every 10 min|Digital Sensor Diagnostic Every Second|Perform Diagnostic of Sensor, Circuitry on Activation