Systevo Bed Unit, with magnetic plug system, 2 control outputs

Part Number: 73091F

Systevo Bed Unit, to provide the suitable nurse call and domotic control funct. at the patient or resident bed.

Connection of a patient handset or authorised device for call initiation using the auto-release magnetic system socket.

By exceeding the predefined pulling force, the system plug is automatically disconnected from the bed unit to prevent mechanical damages (bed unit, cable).

Option: Bed intercom in combination with a multifunctional patient handset for communication with nursing staff.

Controlled by a superordinated room controller (IP) via the data bus (DBUS) or call input (I/O), such as a room terminal or a room electronic module. In data bus mode: connection of an ext. call unit to the call input (I/O).

Handsets are monitored by the bed units according the specifications of VDE 0834 using an interactive data bus.

The bed unit is equipped with 2 control outputs for managing up to 2 external sources.

Additional firmware licenses required to deploy new device functionalities.

Features

Equipment:

• 1 magnetic system socket for connection of multifunctional handset
• Galvanic isolation req. to control 3rd party device (acc. EN 60601.1.1)

Inputs / outputs:

• Power supply 24V DC
• Data bus (DBUS)
• Call input / output (I/O)
• 2 control outputs
• TV sound input, galvanic isolation required according to EN 60601.1.1

Features:

• Call triggering
• Control function for 2 ext. sources
• Control function for nurse call
• Configurable system funct. (Input)

Accessories:

• Cover plate, frame

Scope of delivery

Systevo Bed Unit, screw connection terminals

Accessories

88885F3 Cover plate Systevo bed unit with magnetic plug system design Systevo Call

88914A5 Frame single for 1 coverplate design Systevo Call

88914B5 Frame double for 2 coverplates design Systevo Call

88914C5 Frame triple for 3 coverplates design Systevo Call