Fixed Gas Detectors
Sensepoint Zareba
Please sign in to access more documents
Once signed in, you may be able to access additional documents for your account.
The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Exd or Exe approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics’ controllers or 3rd party DCS / PLC systems. Both flammable and toxic versions are certified to the latest European ATEX safety and performance standards.
The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.
The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Exd, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of ‘sticky’ gases such as Chlorine and Ammonia.
Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.
Additional Features and Benefits:
Fit For Purpose:
- Flammable, toxic and Oxygen versions available
- High performance, low cost
- Suitable for new and retrofit applications
Proven Sensor Technology:
- Surecell™ electrochemical sensors
- Poison resistant catalytic bead
- Fast and reliable
- Typical 2 to 5 years operational life
ATEX Certified:
- Complies with the latest European standards
- Hazardous area approval and performance
- IP65 / 66 for use in harsh environments
- Factory set operation
- Simple to replace
- Minimal training required
Range of Accessories:
- Weatherproof cap
- Flow adaptor
- Duct mounting kit
- Collecting cone
Even the best products deserve expert maintenance!
Elevate your gas detectors’ potential with Honeywell's expert maintenance services! Maximize uptime, eliminate costs, and ensure on-time, on-budget project completion.
Explore our fixed, portable, and high-tech support services now!
Overview
- Brand
- Honeywell
Dimensions & Weight
- Weight range
- 190 g
Technical Specifications
- Humidity Range
- Continuous: 20 to 90% RH
- Intermittent: 10 to 99% RH (Non-Condensing)
- Maximum Pressure
- 110 kPa
- Warm Up Time
- 20 min
- Signal Output
- mV Bridge
- Conduit Entries
- M20, 3/4 in NPT
Operating Characteristics
- Minimum Temperature
- -30°C
Battery & Charging
- Batteries Included
- No
- Batteries Required
- No
Features
- Filter Included
- Yes
Standards & Certifications
- Ingress Protection
- IP65
- IP67
Electrical Specifications
- Power Consumption
- 700 mW
- Operating Voltage
- 2.9 to 3.5 V
Overview
- Brand
- Honeywell
Dimensions & Weight
- Weight range
- 190 g
Technical Specifications
- Humidity Range
- Continuous: 20 to 90% RH
- Intermittent: 10 to 99% RH (Non-Condensing)
- Maximum Pressure
- 110 kPa
- Warm Up Time
- 20 min
- Signal Output
- mV Bridge
- Conduit Entries
- M20, 3/4 in NPT
Operating Characteristics
- Minimum Temperature
- -30°C
Battery & Charging
- Batteries Included
- No
- Batteries Required
- No
Features
- Filter Included
- Yes
Standards & Certifications
- Ingress Protection
- IP65
- IP67
Electrical Specifications
- Power Consumption
- 700 mW
- Operating Voltage
- 2.9 to 3.5 V
- Brand : Honeywell
- Weight range : 190 g
- Humidity Range : Continuous: 20 to 90% RH|Intermittent: 10 to 99% RH (Non-Condensing)
- Minimum Temperature : -30°C
- Batteries Included : No
- Batteries Required : No
- Filter Included : Yes
- Maximum Pressure : 110 kPa
- Ingress Protection : IP65|IP67
- Warm Up Time : 20 min
- Signal Output : mV Bridge
- Power Consumption : 700 mW
- Operating Voltage : 2.9 to 3.5 V
- Conduit Entries : M20, 3/4 in NPT
Manuals and Guides
Certificate
Please sign in to view part numbers available for purchase based on your account Sign In