Fixed Flame Detectors
FS20X Flame Detector
FS20X Flame Detector
Please sign in to access more documents
Once signed in, you may be able to access additional documents for your account.
Overview
Product Overview:Based on the foundation of the highly successful and reliable SS4 Flame Detector, the FS20X Flame Detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS Flame Detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminants. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The Master Microprocessor performs high-speed digital sampling and signal processing calculations: while the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility: and additional memory for storing Event Log and FirePic™ data.The FS20X Flame Detector has a detection range in excess of 200 feet (very high sensitivity setting) for the detection of a one square-foot Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers’ detectors.Additional Features and Benefits:
- Patented* WideBand IR™ Infrared combined with Ultraviolet
- Detection range greater than 200 feet to 1 sq. ft. heptane fire
- Patented* Electronic Frequency Analysis
- Visible Sensor for optimum false alarm rejection
- Selectable detection sensitivities
- Solar blind 90° full 100% cone-of-vision
- Dual Microprocessors for reliable performance
- Real-time clock for accurate time dating of events
- FirePic™ — Up to 6 pre-fire event data storage
- Event log — Up to 200 events with date and time stamp
- Built-in RS-485 ModBus Communication
- Built-in non-isolated 4-20 mA analog output (sink or source)
- Alarm, Fault and Fire Verification relays.
- Automatic Optical Path and Electronic Self-Test
- Widest operating temperature range
- Patented* Electronics Module for components protection with plug-in terminations for easy field installation
- Two ¾” NPT OR 25mm conduit entries
- Low power consumption
- High RFI and EMI immunity
- FM approved
- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
- Arc welding immunity
- False alarm rejection for all environmental conditions
- Minimal maintenance for trouble-free operation
- PC software and Interface Module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
- Suitable for a wide variety of applications.
- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
- Range greater than 200 feet to 1 sq. ft. heptane fire
- Arc welding immunity
- Field of view: 90° full 100% core of vision, ± 45° from on axis
- Operating voltage: 24 VDC nominal (18-32 VDC) - regulated
- Sensitivity: Very high, high, medium and low - switch selectable
Even the best products deserve expert maintenance!
Elevate your gas detectors’ potential with Honeywell's expert maintenance services! Maximize uptime, eliminate costs, and ensure on-time, on-budget project completion.
Explore our fixed, portable, and high-tech support services now!
Specifications
Overview
- Brand
- Honeywell
- Honeywell
- Notifier
- Warranty
- 3 Years from Date of Shipment
Features
- Sub-Category
- Flame Detectors
- Flame Detectors
- Alarm Included
- Yes
- Features
- Arc Welding Immunity
- Relay Included
- Yes
- Warnings & Restrictions
- Do Not Use Silicone-Based or Commercial Window Cleaning Products
- These will Degrade the Model FS20X Detector Performance
- Warning: Potential Electrostitic Charge and Wipe Enclosure Only with a Damp Cloth
- Wireless Technology
- WideBand IR™
- Visual Indicators
- Green LED: Power
- Red LED: Alarm
- Yellow: Fault
- Vibration
- Meets or Exceeds MIL Spec 810C Method 514.2, Curve AW12
Dimensions & Weight
- Mounting Hole Diameter
- 0.25
Technical Specifications
- Output Signal Range
- 4 to 20 mA
- Humidity Range
- 5 to 98% RH (Non-Condensing)
- Altitude Range
- 200ft (60m)
- Analog Output Signal Type
- mA
- Number of Digital Communication Ports
- 2
- Relay Output Configuration
- Auxiliary: SPDT (NO/NC)
- Fault: SPST (NO)
- Fire Alarm: SPDT (NO/NC)
- Relay Activation Settings
- Relay 1: Fire Alarm
- Relay 2: Fault
- Relay 3: Auxilary
- Relay Rated Load
- 1A @24V DC
- Sensing Method
- IR, UV
- Maximum Analog Input Resistance
- 400
- Default Relay Activation
- Alarm Relay (Relay 1), Auxiliary Relay V (Relay 2), Fault Relay (Relay 3)
- Number of Relay Outputs
- 3
- Output Signal Type
- mA
- Plug Type
- 10 pin for J2 Connector
- 6 pin for J1 Connector
- Mounting
- Swivel Bracket Assembly
- Spectral Sensitivity
- Near Band IR: 0.7 to 1.1 microns
- Ultraviolet: 185 to 260 Nanometers
- Visible: 400 to 700 Nanometers
- Wide Band IR: 1.1 to 3.5 Microns
- Loop Resistance
- 50 to 400 Ohms
- 50 to 400 Ohms
- Conduit Entries
- (2) 3/4 in NPT
- Field of View
- 90° Full 100% Core of Vision
- ± 45° From On Axis
- Communication
- FireBus II
- ModBus Protocol
- RS485
- Sensitivity
- Very High, High, Medium, Low
- Wiring
- Shielded: 2.5 sq.mm (14 AWG) to 0.326 sq.mm (22 AWG)
Operating Characteristics
- Minimum Temperature
- -40˚C
- Storage Temperature
- -55 to +110°C
- -55 to 100°C
Standards & Certifications
- Certifications - Regional
- Global
- Ingress Protection
- IP66
- NEMA Rating
- NEMA 4, 4X
Electrical Specifications
- Maximum Operating Current
- 83 mA
- Operating Current
- 85
- Operating Voltage
- 24 VDC
Material Specifications
- Enclosure Material
- 316 Stainless Steel
- Copper-Free Powder Coated Aluminum
- Copper-Free Powder Coated Aluminum or 316 Stainless Steel
Applications & Compatibility
- Application
- Acetylene Processing and Storage
- Aircraft Hangars
- Chemical Production, Storage and Loading Facilities
- Crude Oil and Gasoline Storage and Tank Farms
- Ethanol, Methanol and IPA Production and Storage
- Hydrogen Plants and Storage
- LNG/LPG Loading and Unloading Facilities
- Natural Gas and CNG Plants
- Off-Shore Platforms
- Oil and Gas Pipelines and Pumping Stations
- Paint and Solvent Storage
- Refineries and Oil Production Facilities
- Turbine/Compressor Enclosures
Overview
- Brand
- Honeywell
- Honeywell
- Notifier
- Warranty
- 3 Years from Date of Shipment
Features
- Sub-Category
- Flame Detectors
- Flame Detectors
- Alarm Included
- Yes
- Features
- Arc Welding Immunity
- Relay Included
- Yes
- Warnings & Restrictions
- Do Not Use Silicone-Based or Commercial Window Cleaning Products
- These will Degrade the Model FS20X Detector Performance
- Warning: Potential Electrostitic Charge and Wipe Enclosure Only with a Damp Cloth
- Wireless Technology
- WideBand IR™
- Visual Indicators
- Green LED: Power
- Red LED: Alarm
- Yellow: Fault
- Vibration
- Meets or Exceeds MIL Spec 810C Method 514.2, Curve AW12
Dimensions & Weight
- Mounting Hole Diameter
- 0.25
Technical Specifications
- Output Signal Range
- 4 to 20 mA
- Humidity Range
- 5 to 98% RH (Non-Condensing)
- Altitude Range
- 200ft (60m)
- Analog Output Signal Type
- mA
- Number of Digital Communication Ports
- 2
- Relay Output Configuration
- Auxiliary: SPDT (NO/NC)
- Fault: SPST (NO)
- Fire Alarm: SPDT (NO/NC)
- Relay Activation Settings
- Relay 1: Fire Alarm
- Relay 2: Fault
- Relay 3: Auxilary
- Relay Rated Load
- 1A @24V DC
- Sensing Method
- IR, UV
- Maximum Analog Input Resistance
- 400
- Default Relay Activation
- Alarm Relay (Relay 1), Auxiliary Relay V (Relay 2), Fault Relay (Relay 3)
- Number of Relay Outputs
- 3
- Output Signal Type
- mA
- Plug Type
- 10 pin for J2 Connector
- 6 pin for J1 Connector
- Mounting
- Swivel Bracket Assembly
- Spectral Sensitivity
- Near Band IR: 0.7 to 1.1 microns
- Ultraviolet: 185 to 260 Nanometers
- Visible: 400 to 700 Nanometers
- Wide Band IR: 1.1 to 3.5 Microns
- Loop Resistance
- 50 to 400 Ohms
- 50 to 400 Ohms
- Conduit Entries
- (2) 3/4 in NPT
- Field of View
- 90° Full 100% Core of Vision
- ± 45° From On Axis
- Communication
- FireBus II
- ModBus Protocol
- RS485
- Sensitivity
- Very High, High, Medium, Low
- Wiring
- Shielded: 2.5 sq.mm (14 AWG) to 0.326 sq.mm (22 AWG)
Operating Characteristics
- Minimum Temperature
- -40˚C
- Storage Temperature
- -55 to +110°C
- -55 to 100°C
Standards & Certifications
- Certifications - Regional
- Global
- Ingress Protection
- IP66
- NEMA Rating
- NEMA 4, 4X
Electrical Specifications
- Maximum Operating Current
- 83 mA
- Operating Current
- 85
- Operating Voltage
- 24 VDC
Material Specifications
- Enclosure Material
- 316 Stainless Steel
- Copper-Free Powder Coated Aluminum
- Copper-Free Powder Coated Aluminum or 316 Stainless Steel
Applications & Compatibility
- Application
- Acetylene Processing and Storage
- Aircraft Hangars
- Chemical Production, Storage and Loading Facilities
- Crude Oil and Gasoline Storage and Tank Farms
- Ethanol, Methanol and IPA Production and Storage
- Hydrogen Plants and Storage
- LNG/LPG Loading and Unloading Facilities
- Natural Gas and CNG Plants
- Off-Shore Platforms
- Oil and Gas Pipelines and Pumping Stations
- Paint and Solvent Storage
- Refineries and Oil Production Facilities
- Turbine/Compressor Enclosures
- Brand : Honeywell|Honeywell|Notifier
- Sub-Category : Flame Detectors|Flame Detectors
- Mounting Hole Diameter : 0.25
- Output Signal Range : 4 to 20 mA
- Humidity Range : 5 to 98% RH (Non-Condensing)
- Altitude Range : 200ft (60m)
- Minimum Temperature : -40˚C
- Alarm Included : Yes
- Analog Output Signal Type : mA
- Certifications - Regional : Global
- Features : Arc Welding Immunity
- Number of Digital Communication Ports : 2
- Relay Output Configuration : Auxiliary: SPDT (NO/NC)|Fault: SPST (NO)|Fire Alarm: SPDT (NO/NC)
- Relay Activation Settings : Relay 1: Fire Alarm|Relay 2: Fault|Relay 3: Auxilary
- Relay Rated Load : 1A @24V DC
- Relay Included : Yes
- Sensing Method : IR, UV
- Maximum Analog Input Resistance : 400
- Maximum Operating Current : 83 mA
- Operating Current : 85
- Warnings & Restrictions : Do Not Use Silicone-Based or Commercial Window Cleaning Products|These will Degrade the Model FS20X Detector Performance|Warning: Potential Electrostitic Charge and Wipe Enclosure Only with a Damp Cloth
- Wireless Technology : WideBand IR™
- Default Relay Activation : Alarm Relay (Relay 1), Auxiliary Relay V (Relay 2), Fault Relay (Relay 3)
- Number of Relay Outputs : 3
- Output Signal Type : mA
- Ingress Protection : IP66
- Visual Indicators : Green LED: Power|Red LED: Alarm|Yellow: Fault
- NEMA Rating : NEMA 4, 4X
- Plug Type : 10 pin for J2 Connector|6 pin for J1 Connector
- Mounting : Swivel Bracket Assembly
- Spectral Sensitivity : Near Band IR: 0.7 to 1.1 microns|Ultraviolet: 185 to 260 Nanometers|Visible: 400 to 700 Nanometers|Wide Band IR: 1.1 to 3.5 Microns
- Storage Temperature : -55 to +110°C|-55 to 100°C
- Enclosure Material : 316 Stainless Steel|Copper-Free Powder Coated Aluminum|Copper-Free Powder Coated Aluminum or 316 Stainless Steel
- Operating Voltage : 24 VDC
- Loop Resistance : 50 to 400 Ohms|50 to 400 Ohms
- Conduit Entries : (2) 3/4 in NPT
- Field of View : 90° Full 100% Core of Vision|± 45° From On Axis
- Communication : FireBus II|ModBus Protocol|RS485
- Sensitivity : Very High, High, Medium, Low
- Application : Acetylene Processing and Storage|Aircraft Hangars|Chemical Production, Storage and Loading Facilities|Crude Oil and Gasoline Storage and Tank Farms|Ethanol, Methanol and IPA Production and Storage|Hydrogen Plants and Storage|LNG/LPG Loading and Unloading Facilities|Natural Gas and CNG Plants|Off-Shore Platforms|Oil and Gas Pipelines and Pumping Stations|Paint and Solvent Storage|Refineries and Oil Production Facilities|Turbine/Compressor Enclosures
- Vibration : Meets or Exceeds MIL Spec 810C Method 514.2, Curve AW12
- Warranty : 3 Years from Date of Shipment
- Wiring : Shielded: 2.5 sq.mm (14 AWG) to 0.326 sq.mm (22 AWG)
Data Sheet
Name
Description
File Size
Date
Size
Fire Century FS20X Multi-Spectrum UV-Dual IR-VIS Fire and Flame Detector Data Sheet
application/pdf 403.39 KB
2/1/2012
403.39 KB
Manuals and Guides
Name
Description
File Size
Date
Size
FSL100 Flame Detectors,FS10-R,FS24X Flame Detector,SS2 Flame Detector,FS20X Flame Detector,SS4 Flame Detector Product Guide
application/pdf 2.58 MB
7/15/2021
2.58 MB
FS20X Flame Detector - DTM User Manual
application/pdf 2 MB
5/24/2022
2 MB
FS20X Flame Detector User Manual
application/pdf 1.11 MB
5/25/2022
1.11 MB
Firmware
Name
Description
File Size
Date
Size
FSX Flame Detector - DTM Toolkit
application/zip 49.28 MB
5/24/2022
49.28 MB
FS20X Flame Detector - A014R Tokenized DD R01
application/zip 106.64 KB
5/27/2022
106.64 KB
Brochure
Name
Description
File Size
Date
Size
Technical Note
Name
Description
File Size
Date
Size
FS24X Flame Detector,FS20X Flame Detector Test Lamps use in Flame Detection Applications
application/pdf 201.27 KB
7/15/2021
201.27 KB
FS24X Flame Detector,FS20X Flame Detector Supplementing Flame Detection in Gas Detection Applications
application/pdf 200 KB
7/15/2021
200 KB
FS24X Flame Detector,FS20X Flame Detector Automatic Self-Test for Optical Flame Detectors
application/pdf 203.45 KB
7/15/2021
203.45 KB
FS24X Flame Detector,FS20X Flame Detector Fire Alarm versus Fire Verification
application/pdf 269.68 KB
7/15/2021
269.68 KB
FS24X Flame Detector,FS20X Flame Detector Inverse Square Law - Flame
application/pdf 498.12 KB
7/15/2021
498.12 KB
Certificate
Name
Description
File Size
Date
Size
FS20X Flame Detector EU Declaration of Conformity
application/pdf 254.81 KB
1/25/2022
254.81 KB
TL-1055 Test Lamp - CE EU Declaration of Conformity
application/pdf 161.02 KB
1/3/2022
161.02 KB
FS20X and FS24X Flame DetectorTL-2055 Test Lamp ATEX CE EU Declaration of Conformity
application/pdf 153.27 KB
12/20/2021
153.27 KB
FSX SS4 Certificate of Conformity
application/pdf 474.98 KB
7/15/2021
474.98 KB
FS24X Flame Detector,FS20X Flame Detector,SS2 Flame Detector,SS4 Flame Detector Atex Certificate
application/pdf 170 KB
7/15/2021
170 KB
FS24X Flame Detector,FS20X Flame Detector,SS2 Flame Detector,SS4 Flame Detector IECEx Certificate of Conformity
application/pdf 949.8 KB
7/15/2021
949.8 KB
FS20X INMETRO Certificate of Conformity DNV 18.0088 X - (iss. 02) - (exp. 19 Jul 2024) - DNV
application/pdf 720.96 KB
10/7/2022
720.96 KB
FS20X EU Declaration of Conformity
application/pdf 254.81 KB
1/6/2022
254.81 KB
Others
Name
Description
File Size
Date
Size
Fire Sentry FS20X Specifications
application/pdf 178.13 KB
7/15/2021
178.13 KB
Recommendation for reducing Flame Detector False and Nuisance Alarms
application/pdf 223.8 KB
7/15/2021
223.8 KB
Name
Description
File Size
Date
Size
FS20X Flame Detector EU Declaration of Conformity
application/pdf 254.81 KB
1/25/2022
254.81 KB
Fire Century FS20X Multi-Spectrum UV-Dual IR-VIS Fire and Flame Detector Data Sheet
application/pdf 403.39 KB
2/1/2012
403.39 KB
FS24X Flame Detector,FS20X Flame Detector Test Lamps use in Flame Detection Applications
application/pdf 201.27 KB
7/15/2021
201.27 KB
FSL100 Flame Detectors,FS10-R,FS24X Flame Detector,SS2 Flame Detector,FS20X Flame Detector,SS4 Flame Detector Product Guide
application/pdf 2.58 MB
7/15/2021
2.58 MB
TL-1055 Test Lamp - CE EU Declaration of Conformity
application/pdf 161.02 KB
1/3/2022
161.02 KB
FS24X Flame Detector,FS20X Flame Detector Supplementing Flame Detection in Gas Detection Applications
application/pdf 200 KB
7/15/2021
200 KB
FS20X and FS24X Flame DetectorTL-2055 Test Lamp ATEX CE EU Declaration of Conformity
application/pdf 153.27 KB
12/20/2021
153.27 KB
FSX SS4 Certificate of Conformity
application/pdf 474.98 KB
7/15/2021
474.98 KB
FS24X Flame Detector,FS20X Flame Detector Automatic Self-Test for Optical Flame Detectors
application/pdf 203.45 KB
7/15/2021
203.45 KB
FS24X Flame Detector,FS20X Flame Detector,SS2 Flame Detector,SS4 Flame Detector Atex Certificate
application/pdf 170 KB
7/15/2021
170 KB
FS24X Flame Detector,FS20X Flame Detector,SS2 Flame Detector,SS4 Flame Detector IECEx Certificate of Conformity
application/pdf 949.8 KB
7/15/2021
949.8 KB
Fire Sentry FS20X Specifications
application/pdf 178.13 KB
7/15/2021
178.13 KB
FS24X Flame Detector,FS20X Flame Detector Fire Alarm versus Fire Verification
application/pdf 269.68 KB
7/15/2021
269.68 KB
FS24X Flame Detector,FS20X Flame Detector Inverse Square Law - Flame
application/pdf 498.12 KB
7/15/2021
498.12 KB
Recommendation for reducing Flame Detector False and Nuisance Alarms
application/pdf 223.8 KB
7/15/2021
223.8 KB
FS20X INMETRO Certificate of Conformity DNV 18.0088 X - (iss. 02) - (exp. 19 Jul 2024) - DNV
application/pdf 720.96 KB
10/7/2022
720.96 KB
FS20X Flame Detector - DTM User Manual
application/pdf 2 MB
5/24/2022
2 MB
FS20X Flame Detector User Manual
application/pdf 1.11 MB
5/25/2022
1.11 MB
FSX Flame Detector - DTM Toolkit
application/zip 49.28 MB
5/24/2022
49.28 MB
FS20X Flame Detector - A014R Tokenized DD R01
application/zip 106.64 KB
5/27/2022
106.64 KB
FS20X EU Declaration of Conformity
application/pdf 254.81 KB
1/6/2022
254.81 KB
Name
Date
Size
7/15/2021
5/24/2022
5/25/2022
5/24/2022
7/15/2021
1/6/2022
7/15/2021
Please sign in to view part numbers available for purchase based on your account Sign In
Showing 1 to 10 of 28 parts
Product Number
Please sign in to view part numbers available for purchase based on your account Sign In
Part Number
Description
Leaf Category
Thumbnail
Add to list
FS20X-211-10
REPL MODULE FS20X UVIR STmp
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-10
REPL MODULE FS20X UVIR STmp
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-10-6
REPL MODULE FS20X UVIR STmp, EN54
https://honeywell.scene7.com/is/image/Honeywell65/hbt-Fire-P1923636-primaryimage
FS20X-211-10-6
REPL MODULE FS20X UVIR STmp, EN54
https://honeywell.scene7.com/is/image/Honeywell65/hbt-Fire-P1923636-primaryimage
FS20X-211-21-2
DUAL IRUV FLAME DETECTOR Copper-Free Aluminium Encl. with (2) ¾” NPT entries: FM: cFM for Class I: Division 1: Groups A: B: C: D: Class II: Division 1: Groups E: F: G: Class III
https://honeywell.scene7.com/is/image/Honeywell65/hbt-fire-fs20x-211-21-2-fs20x-uv-ir-al-npt-c-fm-stmp-primaryimage
FS20X-211-21-2
DUAL IRUV FLAME DETECTOR Copper-Free Aluminium Encl. with (2) ¾” NPT entries: FM: cFM for Class I: Division 1: Groups A: B: C: D: Class II: Division 1: Groups E: F: G: Class III
https://honeywell.scene7.com/is/image/Honeywell65/hbt-fire-fs20x-211-21-2-fs20x-uv-ir-al-npt-c-fm-stmp-primaryimage
FS20X-211-21-4
FS20X UVIR AL NPT INMETRO
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-21-4
FS20X UVIR AL NPT INMETRO
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-21-6
DUAL IRUV FLAME DETECTOR Copper-Free Aluminium Encl. with (2) ¾” NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III. With En54-10 certification
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-21-6
DUAL IRUV FLAME DETECTOR Copper-Free Aluminium Encl. with (2) ¾” NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III. With En54-10 certification
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-22-2
FS20X UVIR SS NPT cFM STmp
https://honeywell.scene7.com/is/image/Honeywell65/hbt-fire-fs20x-211-22-2-fs20x-uv-ir-ss-npt-c-fm-stmp-primaryimage
FS20X-211-22-2
FS20X UVIR SS NPT cFM STmp
https://honeywell.scene7.com/is/image/Honeywell65/hbt-fire-fs20x-211-22-2-fs20x-uv-ir-ss-npt-c-fm-stmp-primaryimage
FS20X-211-22-6
DUAL IRUV FLAME DETECTOR Stainless Steel Encl. with (2) ¾”NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III. With En54-10 certification
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-22-6
DUAL IRUV FLAME DETECTOR Stainless Steel Encl. with (2) ¾”NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III. With En54-10 certification
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-23-3
DUAL IRUV FLAME DETECTOR Copper-Free Aluminium Encl. with (2) M25 entries: FM: cFM: ATEX: IECEx for Class I: Zone 1
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-23-3
DUAL IRUV FLAME DETECTOR Copper-Free Aluminium Encl. with (2) M25 entries: FM: cFM: ATEX: IECEx for Class I: Zone 1
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-23-6
FS20X-211 IRUV AL M25 FMEN54
https://s7d1.scene7.com/is/image/Honeywell65/hbt-fire-fs20x211236-fs20xfireandflamedetecto-primaryimage
FS20X-211-23-6
FS20X-211 IRUV AL M25 FMEN54
https://s7d1.scene7.com/is/image/Honeywell65/hbt-fire-fs20x211236-fs20xfireandflamedetecto-primaryimage
FS20X-211-24-3
FS20X UVIR SS M25 cFM ATEX STmp
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
FS20X-211-24-3
FS20X UVIR SS M25 cFM ATEX STmp
https://s7d1.scene7.com/is/image/Honeywell65/FS20X
